Truck Pictures Shop Hours Contact Us About Road-Craft
New England's Only Complete Custom Truck Shop
With over 30 years experience in the truck industry designing and building custom trucks for applications from hauling dirt to military applications we have you covered. Look at the following pages to view our more standard stuff or feel free to call with any questions you may have. We are also proud to offer Rugby truck bodies and The BOSS snowplows. Torwel sanders are available from 1.5 yd to 14yd for everything from pickups to 10 wheel trucks. We stock Protech aluminum toolboxes as well as cabgaurds for the larger trucks. Fenders from Lifetime as well as Protech , WTI and Minimizer are also available. We build a lot of custom aluminum and stainless steel products for the larger trucks as well such as our own heavy duty deckplates, air/electrical boxes and rear light valances etc. We offer Roadworks, Double JJ Products, Lighting from Trucklite, Federal Signal, Whelen, Maxxima, PSE etc. We also offer hydraulic systems sales service and installation. Please feel free to call or e-mail with any need you have.
Custom Work Done Right!

AUXILIARY
POWER UNITS
Click the Picture for More Info
Power your heat, your ac, or even charge your truck for less than .15 gal/hr of diesel fuel with the NEW quiet, lightweight, and fuel efficient APUs from Kohler.
No more wasted fuel or unnecessary wear on your engine.

SNOWPLOW SALE!
Click Above for More
It's nearing the end of plow season and we've still got plows!


We're taking an additional $200 OFF all plow sales!
Please call for pricing and application info.

- For Sale -
$22,000 OBO
  • 2000 F-350 XLT Lariet with Custom Skirted Flatbed
  • 98000 miles
  • 4WD
  • Recessed Toolboxes Front and Rear of the Wheels
  • Wide Aluminum Fairing with LED Lights in the Side
  • Polished toolboxes above the deck
  • Diamond Plate Running Boards with LED Lights
  • Link Air Ride Suspension
  • Gooseneck Hitch and Class V in the Rear
  • Transfer Flow Auxiliary Fuel System
  • Custom Control Console Inside
Please call for more info.

Click the logos for more info on our products!
Click here to see more of our showroom!

CLICK HERE TO SEE A DETAIL OF THIS TRUCK
  • New freightliner set up to work
  • C 102 hydraulics
  • Stainless light bar w/ work lights and whelen led strobe
  • Lifetime 1/2 fenders
  • Toolbox with air,electrical and hydraulics in the base mount
  • Diamond plate deckplate
  • 12' aluminum dump body
  • Barn doors w/ custom latch
  • Click link for more
CLICK HERE TO SEE A DETAIL OF THIS TRUCK
  • Custom aluminum body
  • Illuminated toolboxes
  • Custom stainless trim & accessories
  • Custom headboard and tool rack made entirely in house
  • Completely custom flatbed body
  • Small communications room mounted behind the cab
  • Rotating satellite mount mounted inside body
  • AC installed in the roof
  • Electronics racks installed inside comm. room
  • Generator box installed behind comm. room
CLICK HERE TO SEE A DETAIL OF THIS TRUCK CLICK HERE TO SEE A DETAIL OF THIS TRUCK
  • New Kenworth W900
  • Click Above to View Details
  • Dodge Power Wagon Pickup/Dump Conversion
  • Rugby HR416 Hoist
  • Custom Modified Pro-Tech Toolboxes
  • New Snaplatch Upper Tailgate Latch
  • Tall-Sided Utility Dump
  • Truck Built for the Government
  • Large Cavernous Boxes with Built-In Shelving
  • 3yd Dump with Rugby HR520 Hoist
  • Completely Custom Tailgate Latch Assembly
  • Pneumatically Operated Doors
  • The Ex Road-Works Show Truck was Here for Some Modifications
  • Split Curb-Side Tank
  • Tank is Now Fuel/Hydraulic
  • Made an Inset Toolbox in the Deckplate for Hydraulic/Air Lines
  • New '08 Ford F-550
  • 11' Heavy Duty Aluminum Chip Box
  • Custom I-Pack box with shelves and hooks
  • Custom Underbody box combination
  • Removable Sign Panels
  • Ladder Racks on the Roof
  • Built In Ladder on the Curb Side
  • This truck is in Virginia
  • New Ford F-550
  • Boss 9'2" Poly Vee Plow
  • Custom 9', 3-4 yd Alumuminum Dump with Fold Down Sides
  • Torwel 3 yd Stainless Sand with Honda Motor
  • New GMC 5500 Cab Forward
  • 12 1/2' 12 yd Road-Craft Grain Body
  • Rugby HR 550 hoist with Hot Shift PTO
  • 50" Side Door
  • New Style Barn Door Arrangement without Spreader Bar
  • Removable Rear Panel and Roof
  • ProTech Polished Aluminum Toolboxes
  • All Maxxima LED Lighting
  • Polished Stainless Barlock Hardware
  • 9 1/2' Grain Body with All Kinds of Options
  • Hot Shift PTO
  • Removable Leaf Box
  • Removable Sides
  • High and Low Barn Doors with Scuttle Doors
  • Polished Toolboxes and Fenders
  • Whelen Strobe System
  • Polished Aero Cover
  • All LED Lighting Including Mellenium Lights
  • 11' Brush Truck
  • Started Life as an Ambulance and is now a Brush Truck
  • Custom In-House Boxes
  • Reading Flatbed Dump
  • Custom Aluminum Chipper Box
  • Barn Door Tailgate
  • Heavily Built
  • Emergency Lighting
  • Tall sided dump body
  • Custom fenders
  • Pro-Tech toolboxes
  • Custom upper tailgate snaplatch latch assembly
  • Custom upper tailgate snaplatch latch assembly
  • Over center snaplatch
  • Designed and engineered here at NETD
  • New 3500 Chevy with a Road-Craft Flatbed
  • 20" High x 96" Toolboxes with Tailgate
  • 24" Underbody Boxes
  • Removable Vise Mount
  • Halogen Work Lights
  • 10' Boss Straight Blade Plow
  • Custom Side Boards
  • Emergency Lighting
  • Underbody ProTech Toolbox
  • Completely Custom Van Body
  • Generator System
  • Twin Air Conditioner System
  • Complete Custom Body Built In-House
  • Custom Heavy Guage Aluminum Toolboxes w/ 3/16 D-Plate Doors
  • All Doors Have 206 Latches w/ Stainless D-Ring Handles
  • Maxxima Underbody LED Lighting
  • IH CXT with Many Modifications
  • Twin Stacks with Custom Stainless Light Bars
  • Body Raised to Line Up with Cab
  • Twin Trail Horns with a Dedicated Air Tank
  • Custom Lighting Everywhere with Maxima LED's
  • Custom Trim Panels Below the Cab and Front Bumper
  • Custom Stainless Deckplate and Air Box
  • Custom Single Axle Protech Fenders with MKodifies Mounts
  • Plenty of Chrome and Lights

TruckCraft 8' Steel Inserts $2495 Aluminum $4550
Click To See The TruckCraft Dump Insert In Action!

Click Links Below to See More On Our Products

Call Toll Free (888)-246-5716
New England Truck Design Inc.
275 Leominster Rd, Sterling, Ma. 01564
(Click Here for Map)
Phone (978)422-8870 · Fax (978)422-8871
Send e-mail to: NETDI@aol.com
Custom Design and Fabrication

We Dig Traditional Hot Rods Too!

Top

Counter

TM & © 2008 NETD Inc.
TM & © 2008 DVL Web Design